Description

SOLD SECURE APPROVED PRODUCT

Solid Steel Hardened Shackleless Padlock Included.

Defender Unit Locks onto a Solid Steel Base With Padlock to block the tilt action of door.

Simple Ground Fitting In Front Of Garage Door With two Expandable Security Raw bolts included.

Concrete application- we recommend 4-5 inches of good solid concrete outside the closed garage door for this application.

For tarmac applications see Built In Base unit- Please order this unit in preference to the bolt down unit if you have tarmac, block paves etc- at no extra cost.

Attractive Green/Black Powder Coated Finish - subject to availability.

Heavy construction.

Easy To Fit Within The Hour.

Full Fitting Instructions Included.

Made in Britain.

Feature / Benefits of Lock It Circular Shackleless Padlock.

Solid Steel Hardened Round Lock Body.

Protected Shackle.

Diameter = 73mm.

Five Pin Removable Lock Barrel.

High Security Product eliminates cutting and sawing Risks.

Maximum Pick and Pry Resistance.

Superior Corrosion Resistance.

Keyed alike padlocks available at an extra £5.00 per padlock.

Description

This unit is required when the application site does not have sufficient good concrete outside of the closed garage door (we recommend you need at least 4-5 inches) i.e. - where tarmac or block pavers are present.

Simply excavate a 250mm deep hole and fill with a good 3-2-1 concrete. mix

This unit is FREE when requested in preference to the bolt down base with Garage Defender & Garage Defender Master.

Description

>Built in - flush fitting

>80mm x 80mm x 3mm RHS Section, 800mm height

>Zinc plated finish

>Lift out handles

>Hinged cover plate - flush fitting

>Unique locking system at easy reach height

>Bullet lock retaining in housing - push button locking

>Key only required to open post

>Hazard tape on front of post

>Ideal for commercial applications, available keyed alike ( same key for multiple posts ).